Mercury XL2Z-2234-BA Brake Tube Assembly

You can Select Your Vehicle to check if XL2Z-2234-BA fits your vehicle.

When installing a new brake line, use prefabricated steel brake lines with the correct tube ends already flared and fittings installed. Do not use copper tubing for any brake system components. Prefabricated brake lines are available at auto parts stores and dealers, either pre-bent or in straight sections. If pre-bent lines are not available, purchase a straight section and use proper bending tools to shape the new line to match the original.

After installing a new brake line, check that it's securely supported in the brackets and has plenty of clearance between moving or hot components. Check the master cylinder fluid level and add fluid as necessary. Bleed the brake system and test the brakes carefully before driving the vehicle in traffic. This ensures the proper functioning and safety of the brake system after the replacement.

Park the vehicle on a steep hill with the parking brake set and the transmission in Neutral. If the vehicle rolls, the parking brake is not effective.

Park the vehicle on level ground, turn the engine off, remove the wheel covers, loosen the lug nuts, raise the vehicle, and support it securely on jack stands.