Q: How do you remove and install the air filter and air cleaner housing on Ford Bronco?
A: Remove air filter box cover screws or unclip cover. Lift cover and remove air filter. Clean housing and install new filter. Remove hose clamp(s) securing intake tube(s). Pull tube(s) free. Remove crankcase fresh air hose, if equipped. Detach fresh air intake duct. Remove fasteners securing housing to bracket and remove housing. Reverse installation.
Q: How to inspect and replace the air filter in a preventative maintenance program on Ford Bronco?
A: To keep the filter in good condition, it should be inspected periodically under a preventive maintenance program. Unscrew the wing nut and lift off the top plate to remove the filter. In case of connections with emission control devices, tilt it backward to access them. You can hold it up to sunlight or use a flashlight to check if it is clear. If you see light coming through it then fine. Use a rag to wipe inside of the housing out. Now put the old one back or install the new one into housing and reinstall top plate on it.