How to remove and install a blower motor in a Ford Bronco?

Remove the power cable connected to the negative pole of the battery. The wirings or harness connectors should be taken out from the fan motor. You have to unscrew it and take it out. Take off the wheel of air. Remove the clamp and washer from the motor shaft. Slide off the blower wheel. This is how you can do it in reverse installation for you.

Genuine Ford Bronco Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Blower Motors found

View related parts
Ford Bronco Motor - Cooling Blower
Part Number: F2TZ-18527-A
$63.58 MSRP: $105.09
You Save: $41.51 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Motor
- Replaces: E7TZ-18527-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1987-1996 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT A4LD, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford Bronco FAN AND MOTOR ASY
Part Number: MB3Z-19805-C
$72.28 MSRP: $115.27
You Save: $42.99 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blower Motor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Bronco | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Bronco EVAPORATOR AND HOUSING ASY
Part Number: MB3Z-19B555-ZA
$1061.76 MSRP: $1580.00
You Save: $518.24 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: AC & Heater Assembly, Case Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Bronco | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Bronco Motor Assembly
Part Number: E2TZ-18527-A
Product Specifications
- Other Name: Motor Assy; Blower Motor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1982-1986 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4MT
View related parts
Ford Bronco Motor Assembly
Part Number: E3PZ-18527-A
Product Specifications
- Other Name: Motor Assy; Blower Motor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1980-1981 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4MT

Ford Bronco Blower Motor

The Blower Motor in Ford Bronco is among the critical components of the car that is involved in the heating and cooling system of the car or what is commonly known as the HVAC system. Blower motor controls depend on the driver to manage the quantity of air that flows through the system for a short while to deal with the foggy window or hot interiors. Normally, these controls are wired to a blower motor control module and are significant for a comfortable driving climate. But problems with the electronic module or wiring can cause a malfunction of the heating and air conditioning, and can be solved only by referring to specialists as soon as possible. There is no need to explain when the presence of a blower motor issue may be apparent, for example, switches are missing or climate control is unpredictable; one might be unpleasant to drive a car in such a state.

We provide a wide range of Ford Bronco Blower Motor at the best prices possible. If you need Ford Bronco Blower Motor, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Bronco Blower Motor Parts Questions & Experts Answers

Motor - Cooling Blower
F2TZ-18527-A
Q: How to remove and install a blower motor in a Ford Bronco?
A: Remove the power cable connected to the negative pole of the battery. The wirings or harness connectors should be taken out from the fan motor. You have to unscrew it and take it out. Take off the wheel of air. Remove the clamp and washer from the motor shaft. Slide off the blower wheel. This is how you can do it in reverse installation for you.