How do I locate and remove the resistor on the heater or evaporator housing in the engine compartment on Ford Bronco?

The first thing is, in the engine compartment, you can locate the resistor on the heater or evaporator housing. Additionally, you must ensure that you disconnect the negative battery cable. Then, just unplug the resistor electrical connector. Take away the screws of the resistor and take out it from its housing. Installation is just reversing removal.

Genuine Ford Bronco Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Blower Motor Resistors found

View related parts
Ford Bronco Resistor Assembly
Part Number: E7TZ-19A706-A
$25.19 MSRP: $40.18
You Save: $14.99 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Resistor Assy
- Replaced by: 4C2Z-19A706-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1987-1996 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT A4LD, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford Bronco Resistor Assembly
Part Number: E3TZ-19A706-B
$26.68 MSRP: $42.55
You Save: $15.87 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1980-1986 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4MT
View related parts
Ford Bronco Resistor Assembly
Part Number: E9TZ-19A706-A
$20.29 MSRP: $32.36
You Save: $12.07 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1996 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT A4LD, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford Bronco Resistor Assembly
Part Number: E3TZ-18591-A
Product Specifications
- Other Name: Resistor Assy
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1980-1986 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4MT

Ford Bronco Blower Motor Resistor

Blower Motor Resistor for Ford Bronco models helps control the speed of the blower motor as well as influences its further operation. Its main role is to control the flow of hot or cool air inside the cabin while boosting comfort of Individuals Onboard. The Blower Motor Resistor itself works in line with the blower motor and changes the resistance, which in turns changes the levels of air circulation. It is quite possible that Blower Motor Resistor for Bronco may have been changed during the years and different styles may exist each of which may have different specifications and configurations. These variations can affect the effectiveness and productivity of the air circulation system although in the detail above particular differences are not highlighted. In summary, the Blower Motor Resistor is indeed an incredibly significant factor to help keep the climate comfortable while driving the Ford Bronco automobiles.

We provide a wide range of Ford Bronco Blower Motor Resistor at the best prices possible. If you need Ford Bronco Blower Motor Resistor, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Bronco Blower Motor Resistor Parts Questions & Experts Answers

Resistor Assembly
E7TZ-19A706-A
Q: How do I locate and remove the resistor on the heater or evaporator housing in the engine compartment on Ford Bronco?
A: The first thing is, in the engine compartment, you can locate the resistor on the heater or evaporator housing. Additionally, you must ensure that you disconnect the negative battery cable. Then, just unplug the resistor electrical connector. Take away the screws of the resistor and take out it from its housing. Installation is just reversing removal.