How to replace spark plug wires and inspect the distributor cap and rotor on Ford Bronco?

First of all, it is important to apply silicone dielectric compound to the inside of each boot when replacing spark plug wires. In a well-ventilated garage with poor lighting, watch the wires while the engine is running for any arcing or sparking. Mark each wire for reinstallation and disconnect it by twisting and pulling off the boot using a removal tool. Check them thoroughly for cracks or burns. Replace them one by one in the correct firing order. Look out for carbon tracks, cracks, and worn terminals as you replace the distributor cap and rotor. When fitting a new cap, transfer the wires across individually to avoid confusion.

Genuine Ford Bronco Distributor Cap

Ignition Distributor Cap

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Distributor Caps found

View related parts
Ford Bronco Housing Assy - Distributor Terminal
Part Number: E6AZ-12106-A
$17.56 MSRP: $28.00
You Save: $10.44 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap, Distributor Cap
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1980-1989 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4MT, 5MT
View related parts
Ford Bronco Housing Assy - Distributor Terminal
Part Number: E5DZ-12106-A
$21.43 MSRP: $34.18
You Save: $12.75 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap, Distributor Cap
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1980-1989 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4MT, 5MT
View related parts
Ford Bronco Housing Assy - Distributor Terminal
Part Number: E9FZ-12106-A
$13.73 MSRP: $25.64
You Save: $11.91 (47%)
ADD TO CART
Product Specifications
- Other Name: Cap, Distributor Assembly Cap, Distributor Cap
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1980-1989 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4MT, 5MT
View related parts
Ford Bronco Housing Assy - Distributor Terminal
Part Number: E5BZ-12106-A
$0.00
Product Specifications
- Other Name: Cap, Distributor Cap
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1980-1989 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4MT, 5MT
View related parts
Ford Bronco DSTRBTR CP
Part Number: D9AZ12106A
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1980-1989 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4MT, 5MT

Ford Bronco Distributor Cap

The Distributor Cap of Ford Bronco vehicles is one of the most vital car parts that helps in transmitting energy from ignition coils to the engine thereby, igniting fuels. This part provides a layer of protection to some of the distributor's internal parts and helps to hold the rotor in place so that it fires the spark plugs in the correct order. There are different variants of distributor caps and these include Dual spark plugs per cylinder or wasted spark system. shake, sudden stalls, and backfiring; all the above are signs that may require that the distributor cap to be replace or maintain regularly. Further, they state that water can cause engine burn out and so the distributor has to be kept clean and well sealed for it to function well. Thus, the distributor cap is an inconspicuous but indispensable component of the Ford Bronco's electrical system and occasionally acts as a security mechanism to prevent unauthorized use.

We provide a wide range of Ford Bronco Distributor Cap at the best prices possible. If you need Ford Bronco Distributor Cap, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Bronco Distributor Cap Parts Questions & Experts Answers

Housing Assy - Distributor Terminal
E6AZ-12106-A
Q: How to replace spark plug wires and inspect the distributor cap and rotor on Ford Bronco?
A: First of all, it is important to apply silicone dielectric compound to the inside of each boot when replacing spark plug wires. In a well-ventilated garage with poor lighting, watch the wires while the engine is running for any arcing or sparking. Mark each wire for reinstallation and disconnect it by twisting and pulling off the boot using a removal tool. Check them thoroughly for cracks or burns. Replace them one by one in the correct firing order. Look out for carbon tracks, cracks, and worn terminals as you replace the distributor cap and rotor. When fitting a new cap, transfer the wires across individually to avoid confusion.