How to remove and install an axleshaft oil seal on Ford Crown Victoria?

Take out the axle shaft. Remove the old oil seal by using a removal tool or the axle shaft itself. The old seal is removed from the housing with a seal removal tool or a prybar. Use your socket to hammer in place the new seal. Make sure it fits smoothly with the housing. Afterward, lubricate again and reinstall it in much the same manner as before.

Genuine Ford Crown Victoria Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Seals found

View related parts
Ford Crown Victoria Seal
Part Number: F67Z-1177-AC
$13.73 MSRP: $23.27
You Save: $9.54 (41%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaced by: F67Z-1S177-ACA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Seal
Part Number: 3U2Z-1S177-AA
$46.74 MSRP: $74.55
You Save: $27.81 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Axle Seal, Oil Seal
- Replaces: 3W1Z-1177-AB, BRS-102, 3W1Z-1S177-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT, 4AT 4R70W, 4AT 4R75W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Kit - Seal
Part Number: 3W1Z-1177-AB
$46.74 MSRP: $74.55
You Save: $27.81 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaced by: 3U2Z-1S177-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2006 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W

Ford Crown Victoria Wheel Seal Parts Questions & Experts Answers

Seal
3U2Z-1S177-AA
Q: How to remove and install an axleshaft oil seal on Ford Crown Victoria?
A: Take out the Axle Shaft. Remove the old oil seal by using a removal tool or the axle shaft itself. The old seal is removed from the housing with a seal removal tool or a prybar. Use your socket to hammer in place the new seal. Make sure it fits smoothly with the housing. Afterward, lubricate again and reinstall it in much the same manner as before.