×
Contact Us Live Chat or 1-888-788-9341
My Garage
My Account
Cart
Search Bar
Search by Part Number, Part Name, or Vehicle
Track Order Help Center
Make sure this part fits

Ford E9FZ-18808-A Speaker Assembly

1980-1994 Ford E9FZ18808A

Customer Questions & Expert Answers (11)
Ford E9FZ-18808-A Speaker Assembly
Ford E9FZ-18808-A Speaker Assembly
  • Part Description
    SPEAKER ASY
  • Position
    Front
  • Replaced By
    XS4Z-18808-DA
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • Related Parts

    Shop for related parts for your vehicle

  • Product Specifications

    BrandGenuine Ford
    Manufacturer Part NumberE9FZ-18808-A, E9FZ18808A
    Part DescriptionSPEAKER ASY
    Item Dimensions9.3 x 8.2 x 2.9 inches
    Item Weight1.20 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKUE9FZ-18808-A
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1980-1984 Ford Bronco6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L3AT C6, 4MT
    1989-1990 Ford Bronco II6 Cyl 2.9L4AT A4LD, 4AT AOD, 4MT, 5MT
    1984-1985 Ford EXP4 Cyl 1.6L3AT ATX, 4MT, 5MT
    1988-1990, 1984-1986 Ford Escort4 Cyl 1.6L, 4 Cyl 1.9L, 4 Cyl 2.0L3AT ATX, 4MT, 5MT
    1991-1994 Ford Explorer6 Cyl 4.0L4AT A4LD, 5MT
    1980-1984 Ford F-1506 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.9L3AT C5, 3AT C6, 3MT, 4AT AOD, 4MT
    1980-1984 Ford F-2506 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.6L, 8 Cyl 6.9L, 8 Cyl 7.5L3AT C6, 3MT, 4AT AOD, 4MT
    1980-1984 Ford F-3506 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.6L, 8 Cyl 6.9L, 8 Cyl 7.5L3AT C6, 4MT
    1990 Ford Festiva4 Cyl 1.3L3AT ATX, 5MT
    1990 Ford Mustang4 Cyl 2.3L, 8 Cyl 5.0L4AT A4LD, 4AT AOD, 5MT
    View More

  • Customer Questions & Expert Answers

    Q:
    I would like to know is this part gonna fit with my car Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if E9FZ-18808-A fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How to remove and install AM, AM/FM stereo radios, and speakers on Ford F-250? Posted by Customer
    A:
    To DO away with an AM or AM/FM stereo radio from early models, it is necessary to turn off the cable from the negative terminal of the battery, then to take away the knobs, discs and nuts fastened to radio control shafts in case they exist. Next, unbend the instrument panel bezel and delete the rear support bracket screw, if the exist. Pull the radio out of the instrument panel and remove the antenna cable, wire connector(s) and then proceed to remove the radio chassis from the mounting plate. For later models removal is easier but a special radio removal tools that can be obtained from a dealer or automotive radio shops. Remove the negative terminal of the battery, insert the radio puller on the left and right side of the instruction face plate, push the puller in to releases the radio plate clip and pull out the radio. Remove the wiring connectors and the antenna cable at the rear of the radio, if you are replacing it, transfer the rear mounting bracket to the new radio and connect the wiring connectors and the antenna cable. Put back the radio into the instrument panel slot, fasten the rear mounting bracket and connect the lead-negative battery terminal. For front speakers, to have access to them, the instrument panel pad has to be uninstalled, then the speaker wire connector has to be disconnected, the screws holding the speaker to the instrument panel have to be unscrewed and finally the speaker can be removed. For door speakers: unclip the door trim panel, then unscrew the speaker; pull the speaker out of the mounting recess and disconnect the electrical connection. For rear speakers, if not covered above then disconnect the cable from the negative terminal, then take out the screws and bodyside trim panel grille and if necessary the speaker trim to get to the screws. Last of all, pop off the speaker and grille assembly, unplug the wiring connector and installation is the reverse of removal for all the parts.
    Posted by FordPartsGiant Specialist
    Q:
    How to remove and install AM, AM/FM stereo radios, and speakers on Ford Bronco? Posted by Customer
    A:
    To DO away with an AM or AM/FM stereo radio from early models, it is necessary to turn off the cable from the negative terminal of the battery, then to take away the knobs, discs and nuts fastened to radio control shafts in case they exist. Next, unbend the instrument panel bezel and delete the rear support bracket screw, if the exist. Pull the radio out of the instrument panel and remove the antenna cable, wire connector(s) and then proceed to remove the radio chassis from the mounting plate. For later models removal is easier but a special radio removal tools that can be obtained from a dealer or automotive radio shops. Remove the negative terminal of the battery, insert the radio puller on the left and right side of the instruction face plate, push the puller in to releases the radio plate clip and pull out the radio. Remove the wiring connectors and the antenna cable at the rear of the radio, if you are replacing it, transfer the rear mounting bracket to the new radio and connect the wiring connectors and the antenna cable. Put back the radio into the instrument panel slot, fasten the rear mounting bracket and connect the lead-negative battery terminal. For front speakers, to have access to them, the instrument panel pad has to be uninstalled, then the speaker wire connector has to be disconnected, the screws holding the speaker to the instrument panel have to be unscrewed and finally the speaker can be removed. For door speakers: unclip the door trim panel, then unscrew the speaker; pull the speaker out of the mounting recess and disconnect the electrical connection. For rear speakers, if not covered above then disconnect the cable from the negative terminal, then take out the screws and bodyside trim panel grille and if necessary the speaker trim to get to the screws. Last of all, pop off the speaker and grille assembly, unplug the wiring connector and installation is the reverse of removal for all the parts.
    Posted by FordPartsGiant Specialist
    Q:
    How do you install the door speakers after removal for the 2001 Ford Ranger? Posted by Customer
    A:
    Installation is the reverse of the removal steps.
    Posted by FordPartsGiant Specialist
    Q:
    How do you install the radio or CD player after removal for the 1990 Ford Thunderbird? Posted by Customer
    A:
    Plug in the electrical connectors and slide the radio or CD player along the track into the instrument panel until the clips snap in place.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you remove door mounted speakers for the 1997 Lincoln Town Car? Posted by Customer
    A:
    Remove the door trim panel, remove the mounting screws, withdraw the speaker, disconnect the electrical connector, and remove the speaker from the vehicle.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you remove rear quarter panel mounted speakers for the 1985 Lincoln Mark VII? Posted by Customer
    A:
    Remove the screws and pry off the speaker grille, remove the retaining screws, withdraw the speaker, disconnect the electrical connector, and remove the speaker from the vehicle.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How are the radio receiver and CD player assemblies retained in the instrument panel for the 1990 Mercury Cougar? Posted by Customer
    A:
    They are retained by special clips.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you install the radio/CD player after removal for the 1991 Mercury Grand Marquis? Posted by Customer
    A:
    Installation is the reverse of removal.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you remove body mounted rear speakers on the 1988 Ford Bronco II? Posted by Customer
    A:
    Remove the four speaker mounting screws. Pull the speaker out from the trim panel and disconnect the wire harness plug.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you install the speaker after removal for the 1997 Ford Explorer? Posted by Customer
    A:
    Installation is the reverse of the removal steps.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Car Speakers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part E9FZ-18808-A, the Right Choice

To ensure reliability, purchase Ford part # E9FZ-18808-A Speaker Assembly. It is sometimes referred to as Ford Car Speakers. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford Bronco, F-150, Ranger models. It fits Lincoln Continental, Mark VII, Town Car. It also fits Mercury Cougar, Lynx, Tracer.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford E9FZ18808A Speaker Assembly. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly