Make sure this part fits

Lincoln E43Z-12127-G Distributor Assembly

1980-1989 Lincoln E43Z12127G

Customer Questions & Expert Answers (8)
Ford E43Z-12127-G Distributor Assembly
  • Part Description
    Distributor Assy
  • Base No.
    12127
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Lincoln
    Base No.12127
    Manufacturer Part NumberE43Z-12127-G, E43Z12127G
    Part DescriptionDistributor Assy
    Manufacturer NoteSERVICE REPLACEMENT
    Item Dimensions13.9 x 4.3 x 4.2 inches
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKUE43Z-12127-G
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1982-1989 Lincoln Continental6 Cyl 3.8L, 8 Cyl 5.0L4AT, 4AT AOD, 4AT AXOD
    1980-1983 Lincoln Mark VI8 Cyl 5.0L, 8 Cyl 5.8L4AT AOD
    1984-1989 Lincoln Mark VII8 Cyl 5.0L4AT, 4AT AOD
    1982-1989 Lincoln Town Car8 Cyl 5.0L4AT AOD
  • Customer Questions & Expert Answers

    Q:
    I would like to know is this part gonna fit with my car Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if E43Z-12127-G fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How do you install the distributor for the 1990 Ford Thunderbird? Posted by Customer
    A:
    Insert it into the engine in the same relationship to the block as before. Check the alignment marks and rotor position, then turn the crankshaft in the normal direction of rotation to engage the gears. Seat the distributor against the block and align the marks made on the distributor base and the block.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Distributor
    Q:
    How do you remove the distributor for the 1985 Lincoln Continental? Posted by Customer
    A:
    Start by unplugging the primary lead from the coil and the electrical connector for the module. Then, remove the distributor cap and turn the engine until the rotor is pointing towards the number one spark plug terminal. Make marks on the distributor base and engine block to ensure proper installation. Remove the distributor hold-down bolt and clamp, and carefully pull the distributor straight up.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Distributor
    Q:
    How do you install the distributor for the 1985 Lincoln Mark VII? Posted by Customer
    A:
    To install the distributor, insert it into the engine in the same position as before. Check the alignment marks and rotor to ensure proper placement. Install the hold-down clamp and bolt, tighten the distributor cap, and plug in the module electrical connector. Reattach the spark plug wires and connect the battery.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Distributor
    Q:
    How do you install the distributor for the 1983 Lincoln Town Car? Posted by Customer
    A:
    To install the distributor, insert it into the engine in the same position as before. Check the alignment marks and rotor to ensure proper placement. Install the hold-down clamp and bolt, tighten the distributor cap, and plug in the module electrical connector. Reattach the spark plug wires and connect the battery.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Distributor
    Q:
    What should you do after installing the distributor for the 2005 Mercury Grand Marquis? Posted by Customer
    A:
    Place the hold-down clamp and loosely install the bolt, then tighten the distributor cap screws securely. Plug in the module electrical connector, reattach the spark plug wires, and connect the battery cable to the negative terminal.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Distributor
    Q:
    What should you do after installing the distributor for the 1982 Mercury Capri? Posted by Customer
    A:
    Install the distributor cap, tighten the cap screws securely, plug in the module electrical connector, reattach the spark plug wires, and connect the battery cable to the negative terminal.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Distributor
    Q:
    How do you remove the distributor for the 1990 Mercury Cougar? Posted by Customer
    A:
    Remove the distributor hold down-bolt and clamp, then pull the distributor straight up to remove it.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Distributor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part E43Z-12127-G, the Right Choice

To ensure reliability, purchase Ford part # E43Z-12127-G Distributor Assembly. It is sometimes referred to as Lincoln Distributor. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Lincoln Continental, Mark VI, Mark VII models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford E43Z12127G Distributor Assembly. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Lincoln parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly