Lincoln E9SZ-18808-B Speaker Assembly

You can Select Your Vehicle to check if E9SZ-18808-B fits your vehicle.

Remove the door trim panel to remove door mounted speakers. Next, remove the lour speaker attaching screws. Pull the speaker out from the door frame and disconnect the wire harness plug. Installation is the reverse of the removal procedure. For body mounted rear speakers on Ranger models, remove the four speaker grille attaching screws and remove the grille. On Bronco II models, gently pry the speaker grille from the trim panel. On SuperCab models, remove the four speaker mounting screws. Pull the speaker out from the trim panel and disconnect the wire harness plug. Installation is the reverse of the removal procedure.

Disconnect the negative cable from the battery. For the radio/CD player removal, remove the instrument cluster bezel. For theft protection, the radio receiver and CD player assemblies are retained in the instrument panel by special clips. Releasing these clips requires the use of two Ford removal tools T87P-19061-A, or two short lengths of coathanger wire bent into U-shapes. Insert the tools into the holes at the corners of the radio/CD player assembly until you feel the internal clips release. With the clips released, flex outward simultaneously on both tools and pull the assembly out instrument panel, disconnect the antenna and electrical connectors and remove it from the vehicle. For installation, plug in the electrical connectors and slide the radio or CD player along the track and into the instrument panel until the clips can be felt snapping in place. For door mounted speakers, remove the door trim panel. Remove the mounting screws, withdraw the speaker, unplug the electrical connector and remove the speaker from the vehicle. Installation is the reverse of removal. For rear quarter panel mounted speakers, pry off the speaker grille. Remove the retaining screws, withdraw the speaker, unplug the electrical connector and remove the speaker from the vehicle. Installation is the reverse of removal.

Remove the door trim panel, remove the mounting screws, withdraw the speaker, disconnect the electrical connector, and remove the speaker from the vehicle.

Remove the door trim panel, then remove the mounting screws, withdraw the speaker, unplug the electrical connector, and remove the speaker from the vehicle.

Open the trunk lid, work under the package tray, disconnect the electrical connector, remove the retaining screws/nuts or detach the clips, then lower the speaker and remove it from the vehicle.