How to change the transmission fluid and replace the filter on Ford Bronco?

At specified intervals, change transmission fluid and replace filter. No drain plug, remove transmission oil pan to drain fluid. Warm up vehicle, support on jackstands. Place drain pan under pan, remove bolts, lower pan to drain fluid. Inspect for metal particles. Remove filter/strainer, clean surfaces, replace with new gasket. Apply RTV sealant, position new gasket, reinstall pan, tighten bolts diagonally. Lower vehicle, add fluid gradually through dipstick tube, check level with dipstick, run engine through gears. Drive to reach normal temperature, park on level surface, check fluid level again, adjust as needed. Avoid overfilling.

Genuine Ford Bronco Automatic Transmission Filter

AT Filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Automatic Transmission Filters found

View related parts
Ford Bronco Screen Assembly
Part Number: HL3Z-7A098-A
$54.83 MSRP: $96.55
You Save: $41.72 (44%)
ADD TO CART
Product Specifications
- Other Name: Screen Assy; Filter, Screen
- Replaces: FT-215, L1MZ-7A098-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Bronco | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Bronco Filter Assembly
Part Number: F6TZ-7A098-BB
$28.27 MSRP: $45.09
You Save: $16.82 (38%)
ADD TO CART
Product Specifications
- Other Name: Filter Assy
- Replaced by: YC3Z-7A098-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996 Ford Bronco | 8 Cyl 5.0L, 8 Cyl 5.8L | 4AT E4OD, 5MT
View related parts
Ford Bronco Filter Assembly
Part Number: F6TZ-7A098-AB
$27.82 MSRP: $44.36
You Save: $16.54 (38%)
ADD TO CART
Product Specifications
- Other Name: Filter Assy
- Replaced by: YC3Z-7A098-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996 Ford Bronco | 8 Cyl 5.0L, 8 Cyl 5.8L | 4AT E4OD, 5MT
View related parts
Ford Bronco Screen Assembly
Part Number: D5AZ-7A098-B
$16.76 MSRP: $26.73
You Save: $9.97 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Screen Assy; Filter, Filter Kit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1996 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT A4LD, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford Bronco Screen Assembly
Part Number: D3TZ-7A098-B
Product Specifications
- Other Name: Screen Assy; Filter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1996 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT A4LD, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford Bronco Screen Assembly
Part Number: E1AZ-7A098-A
Product Specifications
- Other Name: Screen Assy; Filter, Filter Kit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1993 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford Bronco Screen Assembly
Part Number: E5TZ7A098C
Product Specifications
- Other Name: Screen Assy; Filter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1993 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT AOD, 4AT E4OD, 4MT, 5MT

Ford Bronco Automatic Transmission Filter Parts Questions & Experts Answers

Filter Assembly
F6TZ-7A098-BB
Q: How to change the transmission fluid and replace the filter on Ford Bronco?
A: At specified intervals, change transmission fluid and replace filter. No drain plug, remove transmission oil pan to drain fluid. Warm up vehicle, support on jackstands. Place drain pan under pan, remove bolts, lower pan to drain fluid. Inspect for metal particles. Remove filter/strainer, clean surfaces, replace with new gasket. Apply RTV sealant, position new gasket, reinstall pan, tighten bolts diagonally. Lower vehicle, add fluid gradually through dipstick tube, check level with dipstick, run engine through gears. Drive to reach normal temperature, park on level surface, check fluid level again, adjust as needed. Avoid overfilling.