How to remove and install the oil pump in gasoline engine on Ford Excursion?

Current supplies of the oil pump come only as an overhaul kit and hence no service elements of the pump nor any recommended repair procedures are available in the names of the manufacturer. To remove the oil pump the vehicle must be raised and secured on jackstands, also, the engine oil must be removed. Raise the oil pan slightly and unbolt it but do not remove it; undo the two bolts which connect the oil pump pick-up tube to the oil pump. However, before you do this pull off the timing chain cover, timing chains, chain guides, and crankshaft timing chain sprockets. Then, unscrew the four oil pump screws and pull the pump off the engine head or block as it may be. During installation, check at the pick-up tube O-ring gasket and replace it if it is worn out. Insert the oil pump into the engine and fasten the bolts as tightly as possible following the recommended torque setting; for priming the oil-pump, pour clean oil into the pick-up port and rotate the pump manually. At last, retract the installation sequence in order, add the right types and measures of oil in the engine, start the engine; search for leaks.

Genuine Ford Excursion Oil Pump

Oil Fluid Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Oil Pumps found

View related parts
Ford Excursion Cover
Part Number: 4C3Z-6608-AA
$637.28 MSRP: $903.17
You Save: $265.89 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 4C3Z-6608-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Excursion | 8 Cyl 6.0L | 4AT 4R100, 5AT
View related parts
Ford Excursion Cover
Part Number: 5C3Z-6608-A
$885.72 MSRP: $1063.49
You Save: $177.77 (17%)
ADD TO CART
Product Specifications
- Replaced by: 5C3Z-6608-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Ford Excursion | 8 Cyl 6.0L | 4AT 4R100, 5AT
View related parts
Ford Excursion Cover
Part Number: 3C3Z-6608-BA
$117.42 MSRP: $163.49
You Save: $46.07 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pump
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Excursion | 8 Cyl 6.0L | 4AT 4R100, 5AT
View related parts
Ford Excursion Pump Assembly - Oil
Part Number: F8AZ-6600-AA
$132.24 MSRP: $193.33
You Save: $61.09 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assy - Oil
- Replaced by: 5L3Z-6600-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | 10 Cyl 6.8L, 8 Cyl 5.4L | 4AT 4R100, 5AT
View related parts
Ford Excursion Rotor And Shaft Assembly
Part Number: XC3Z-6608-AA
$231.65 MSRP: $325.40
You Save: $93.75 (29%)
ADD TO CART
Product Specifications
- Other Name: Rotor And Shaft Assy; Oil Pump
- Replaces: F4TZ-6608-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Ford Excursion | 8 Cyl 7.3L | 4AT 4R100, 5AT
View related parts
Ford Excursion Pump Assembly - Oil
Part Number: F81Z-7A103-CA
Product Specifications
- Other Name: Pump Assy - Oil
- Replaced by: 8C3Z-7A103-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2005 Ford Excursion | 10 Cyl 6.8L, 8 Cyl 5.4L, 8 Cyl 6.0L, 8 Cyl 7.3L | 4AT 4R100, 5AT

Ford Excursion Oil Pump

The Oil Pump of Ford Excursion vehicles is one of those components that predetermines the effective operation of the internal combustion engine. It is used to pump oil at high pressure to provide lubrication and cooling of critical engine parts including bearings and piston, also provides hydraulic oil of small actuators. The standard power driven oil pumps incorporated into the Ford Excursion are usually used with the crankshaft or the camshaft and are generally regarded as very dependable. A generally used part of the Ford Excursion consists of several types of oil pumps such as the gear, trochoid or the vane type of pump may be used. The oiling system pulls the oil from the sump, filters it then supplies it back into the engine where it needs it, the pressure is important for the health of the engine. It is especially beneficial in prolonging the life span of the Ford Excursion's engines given the fact that clogging is always a possibility whenever the change of oil and filter is left for too long.

We provide a wide range of Ford Excursion Oil Pump at the best prices possible. If you need Ford Excursion Oil Pump, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Excursion Oil Pump Parts Questions & Experts Answers

Pump Assembly - Oil
F8AZ-6600-AA
Q: How to remove and install the oil pump in gasoline engine on Ford Excursion?
A: Current supplies of the oil pump come only as an overhaul kit and hence no service elements of the pump nor any recommended repair procedures are available in the names of the manufacturer. To remove the oil pump the vehicle must be raised and secured on jackstands, also, the engine oil must be removed. Raise the Oil Pan slightly and unbolt it but do not remove it; undo the two bolts which connect the oil pump pick-up tube to the oil pump. However, before you do this pull off the Timing Chain cover, timing chains, chain guides, and crankshaft timing chain sprockets. Then, unscrew the four oil pump screws and pull the pump off the engine head or block as it may be. During installation, check at the pick-up tube O-ring gasket and replace it if it is worn out. Insert the oil pump into the engine and fasten the bolts as tightly as possible following the recommended torque setting; for priming the oil-pump, pour clean oil into the pick-up port and rotate the pump manually. At last, retract the installation sequence in order, add the right types and measures of oil in the engine, start the engine; search for leaks.