How do you install a camshaft oil seal on Ford Focus?

Remove the negative cable from the battery then, take off the accessory drivebelt. Subsequently, remove the engine timing belt. Place a suitable bar through the camshaft pulley hole to hold it; remove the retaining bolt and extract the sprocket. Standing bare and using a suitable hooked tool, pull the seal out. Coat the new metal lip of the seal with clean engine oil, position it and pull it over with a long bolt of the same thread size as that of the pulley bolt and use a suitable driver piece such as a large socket. Replace the sprocket and tighten the bolt to the required value of torque. The rest of the installation process is just the opposite of the following removal steps.

Genuine Ford Focus Camshaft Seal

Cam Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Camshaft Seals found

View related parts
Ford Focus Seal
Part Number: F8CZ-6K292-AA
$13.73 MSRP: $18.75
You Save: $5.02 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2004 Ford Focus | 4 Cyl 2.0L, 4 Cyl 2.0L Zetec VVT | 4AT 4F27E, 4-Speed Automatic Transaxle - 4F27E, 5MT, 5-Speed Manual Transmission - B5/IB5, 5-Speed Manual Transmission - MTX75, 6MT, 6-Speed Manual Transmission, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Focus Seal
Part Number: F5RZ-6K292-B5A
$12.17 MSRP: $18.91
You Save: $6.74 (36%)
ADD TO CART
Product Specifications
- Replaces: F5RZ-6K292-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2004 Ford Focus | 4 Cyl 2.0L, 4 Cyl 2.0L Zetec EFI, 4 Cyl 2.0L Zetec VVT | 4AT 4F27E, 4-Speed Automatic Transaxle - 4F27E, 5MT, 5-Speed Manual Transmission - B5/IB5, 5-Speed Manual Transmission - MTX75, 6MT, 6-Speed Manual Transmission, Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Focus Seal
Part Number: E7FZ-6K292-A
$13.73 MSRP: $18.55
You Save: $4.82 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Seal
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2003 Ford Focus | 4 Cyl 2.0L | 4AT 4F27E, 5MT, 6MT

Ford Focus Camshaft Seal

The Camshaft Seal in Auto model Ford Focus has an important function of covering the space within an engine, because it does not allow the entry of such substances as dirt, oil and other elements to the certain section where the camshaft comes out of the cylinder head. This seal is critical to the Camshaft lubrication to ensure optimal performances of the engine and its over components. The Camshaft Seals that have been used in the Ford Focus over the years include the following and every type was aimed at boosting the performance of the vehicle and reliability as well. While specific differences between these styles are not detailed, the primary function remains consistent across all versions: In addition, to protect the engine from destructive particles while at the same time providing adequate lubrication. The Camshaft Seal plays an important role of determining the overall performance of the Ford Focus since it is directly involved in the structure of the vehicle's engine.

We provide a wide range of Ford Focus Camshaft Seal at the best prices possible. If you need Ford Focus Camshaft Seal, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Focus Camshaft Seal Parts Questions & Experts Answers

Seal
F5RZ-6K292-B5A
Q: How do you install a camshaft oil seal on Ford Focus?
A: Remove the negative cable from the battery then, take off the accessory drivebelt. Subsequently, remove the engine Timing Belt. Place a suitable bar through the camshaft pulley hole to hold it; remove the retaining bolt and extract the sprocket. Standing bare and using a suitable hooked tool, pull the seal out. Coat the new metal lip of the seal with clean engine oil, position it and pull it over with a long bolt of the same thread size as that of the pulley bolt and use a suitable driver piece such as a large socket. Replace the sprocket and tighten the bolt to the required value of torque. The rest of the installation process is just the opposite of the following removal steps.