How to service valves, valve seats, and valve guides on Lincoln Continental?

Due to the intricate nature of the task and the high cost of the necessary special tools and equipment, servicing of the valves, valve seats, and valve guides, often referred to as a valve job, is typically more conveniently and affordably carried out by an automotive machine shop. A home mechanic can remove and disassemble the head, perform the initial cleaning and inspection, then reassemble and deliver it to a dealer service department or an automotive machine shop for the actual service work. This inspection allows the mechanic to assess the condition of the head and valve train components and to understand what work and new parts are needed when interacting with an automotive machine shop. The dealer service department or automotive machine shop will then remove the valves and springs, recondition or replace the valves and valve seats, recondition the valve guides, check and replace the valve springs, spring retainers or rotators and keepers (if necessary), replace the valve seals with new ones, reassemble the valve components and ensure the installed spring height, and pressure, is correct. The cylinder head gasket surface will also be resurfaced if it's warped, if not beyond service limits. It may be wise to have the cylinder head pressure checked for internal coolant leaks, particularly if the engine has overheated. After the valve job, the head will be in a condition similar to new. When the head is returned, it should be cleaned again before installation on the engine to remove any remaining metal particles and abrasive grit from the valve service or head resurfacing operations. Compressed air can be used to blow out all the oil holes and passages.

Genuine Lincoln Continental Exhaust Valve

Exhaust Muffler Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Exhaust Valves found

View related parts
Lincoln Continental Valve - Exhaust
Part Number: EJ7Z-6505-A
$18.35 MSRP: $26.83
You Save: $8.48 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Lincoln Continental | 4 Cyl 2.0L EcoBoost (240PS) | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln Continental Valve - Exhaust
Part Number: AT4Z-6505-A
$13.57 MSRP: $19.83
You Save: $6.26 (32%)
ADD TO CART
Product Specifications
- Other Name: Exhaust Valve
- Replaces: 7T4Z-6505-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln Continental | 6 Cyl 3.7 L GAS, 6 Cyl 3.7L DOHC | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln Continental Valve - Exhaust
Part Number: F3LY-6505-A
$23.37 MSRP: $34.17
You Save: $10.80 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Valve, Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2002 Lincoln Continental | 8 Cyl 4.6L | 4AT 4F50N, 4AT AX4N, 4AT AX4S, 4AT AXOD-E
View related parts
Lincoln Continental Valve - Exhaust
Part Number: FT4Z-6505-B
$58.71 MSRP: $85.83
You Save: $27.12 (32%)
ADD TO CART
Product Specifications
- Other Name: Exhaust Valve
- Replaces: FT4Z-6505-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln Continental | 6 Cyl 2.7 L GAS, 6 Cyl 2.7L | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln Continental Valve Exhaust
Part Number: E9SZ6505A
$18.13 MSRP: $24.77
You Save: $6.64 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Exhaust; Exhaust Valve, Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1988-1994 Lincoln Continental | 6 Cyl 3.8L | 4AT AX4S, 4AT AXOD, 4AT AXOD-E
- 1982 Lincoln Continental | 6 Cyl 3.8L, 8 Cyl 5.0L | 4AT AOD
View related parts
Lincoln Continental Valve - Exhaust
Part Number: GB8Z-6505-A
$29.00 MSRP: $41.32
You Save: $12.32 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Valve
- Replaced by: GB8Z-6505-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Lincoln Continental | 6 Cyl 3.0 L GAS, 6 Cyl 3.0L | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Lincoln Continental Valve - Exhaust
Part Number: E43Z-6505-A
$48.37 MSRP: $69.50
You Save: $21.13 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Valve, Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1982-1989 Lincoln Continental | 6 Cyl 2.4L, 6 Cyl 3.8L, 8 Cyl 5.0L | 4AT, 4AT AOD, 4AT AXOD
View related parts
Lincoln Continental Valve - Exhaust
Part Number: E43Z-6505-B
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1982-1989 Lincoln Continental | 6 Cyl 2.4L, 6 Cyl 3.8L, 8 Cyl 5.0L | 4AT, 4AT AOD, 4AT AXOD
View related parts
Lincoln Continental Valve Exhaust
Part Number: E4AZ6505A
Product Specifications
- Other Name: Valve - Exhaust; Exhaust Valve, Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1982-1985 Lincoln Continental | 6 Cyl 2.4L, 6 Cyl 3.8L, 8 Cyl 5.0L | 4AT, 4AT AOD
View related parts
Lincoln Continental Valve - Exhaust
Part Number: E4FZ-6505-A
Product Specifications
- Other Name: Exhaust Valve
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1982-1985 Lincoln Continental | 6 Cyl 2.4L, 6 Cyl 3.8L, 8 Cyl 5.0L | 4AT, 4AT AOD
View related parts
Lincoln Continental Exhaust Valve
Part Number: E5ZZ-6505-A
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1982-1989 Lincoln Continental | 6 Cyl 2.4L, 6 Cyl 3.8L, 8 Cyl 5.0L | 4AT, 4AT AOD, 4AT AXOD

Lincoln Continental Exhaust Valve Parts Questions & Experts Answers

Valve - Exhaust
E4FZ-6505-A
Q: How to service valves, valve seats, and valve guides on Lincoln Continental?
A: Due to the intricate nature of the task and the high cost of the necessary special tools and equipment, servicing of the valves, valve seats, and valve guides, often referred to as a valve job, is typically more conveniently and affordably carried out by an automotive machine shop. A home mechanic can remove and disassemble the head, perform the initial cleaning and inspection, then reassemble and deliver it to a dealer service department or an automotive machine shop for the actual service work. This inspection allows the mechanic to assess the condition of the head and valve train components and to understand what work and new parts are needed when interacting with an automotive machine shop. The dealer service department or automotive machine shop will then remove the valves and springs, recondition or replace the valves and valve seats, recondition the valve guides, check and replace the valve springs, spring retainers or rotators and keepers (if necessary), replace the valve seals with new ones, reassemble the valve components and ensure the installed spring height, and pressure, is correct. The cylinder head gasket surface will also be resurfaced if it's warped, if not beyond service limits. It may be wise to have the cylinder head pressure checked for internal coolant leaks, particularly if the engine has overheated. After the valve job, the head will be in a condition similar to new. When the head is returned, it should be cleaned again before installation on the engine to remove any remaining metal particles and abrasive grit from the valve service or head resurfacing operations. Compressed air can be used to blow out all the oil holes and passages.