×
- Live Chat
- 1-888-788-9341
My Garage
My Account
Cart
Gas Engine Parts - Internal-Upper fit your 1983 Ford Ranger 4 Cyl 2.3L 4-Speed Manual Transmission
Currently shopping for
1983 Ford Ranger
Change VehicleVehicle Options
4 Cyl 2.3L; 4-Speed Manual TransmissionVehicle Options
4 Cyl 2.3L; 4-Speed Manual TransmissionCategories Close X
Currently selected
Engine
- Camshaft Gear And Bearings
- Crankshaft And Flywheel
- Cylinder Block & Plugs
- Cylinder Block And Related Parts
- Cylinder Head And Related Parts
- Engine Countershaft, Gear, Tensioner And Timing Bolt
- Engine Supports - (Front And Rear)
- Engine Supports - (Front And Rear) Oil Filter And Related Parts
- Engine Supports - (Front And Rear) Oil Pump And Related Parts
- Engine Supports - (Front And Rear) Piston And Connecting Rod
- Engine Supports -(Front And Rear) Gasket Set - Complete
- Engine Supports -(Front And Rear) Oil Cooler
- Engine Supports -(Front And Rear) Oil Pan, Timing Gear Cover And Related Parts
- Engine Supports -(Front And Rear) Valves And Related Parts
- Gas Cylinder Block And Plugs
- Gas Engine Parts - External
- Gas Engine Parts - Intake Manifold
- Gas Engine Parts - Internal-Lower
- Gas Engine Parts - Internal-Upper
- Gas Engine Supports - (Front And Rear)
- Gas Engine Supports - (Front And Rear) Oil Filter (Spin-On Type)
- Gas Engine Supports - (Front And Rear) Oil Pump
- Tensioner And Timing Bolt Engine Front. Upper, Lower Case & Oil Filter
Other Categories
Accelerator Linkage, Air Cleaner & Speed Control
Air Conditioner, Radio & Shock Absorbers
Alternator, Battery, Distributor & Starter
BODY Body
Fenders & Hood
Frame, Exhaust System & Springs
Front Axle & Steering
Fuel System & Manifolds
Lamps & Wiring
Manual Transmission
Radiator & Grill
Rear Axle, Drive & Coupling Shafts
Speedometer, Bumpers, Mirrors & Wipers
Wheels & Brakes
Parts Questions
Sort by:
Recommended
Part No. & Part Description
Price & Qty.
Part No. &
Part Description
Part Description
E3TZ-6A008-A
DOWEL (CYLINDER HEAD TO BLOCK)Dowel - Pin- Require Quantity: 4
- Package Quantity: 4
- Base Number: 6A008
- Callout Name: 6A008
$9.80 $5.734
- DISTRIBUTOR ASSY. IDENTIFICATION CHART
$24.36 $15.281 
$40.73 $25.541
$28.00 $17.561
$46.18 $28.961
$34.18 $21.431
$36.73 $23.031
$11.58 $7.451
$72.96 $53.401- $18.75 $13.731
$0.00
- $0.00
E6DZ-6700-A
SEAL (CYLINDER FRONT COVER OIL)Seal Assy - Crankshaft Oil - Front- Base Number: 6700
- Callout Name: 6700
$33.00 $23.171
F1SZ-10884-A
SENDER (WATER TEMPERATURE INDICATOR ENGINE UNIT)Sender Assy - Temperature- *SW-924-#270-incl. green insulator, (6/92) , w/gauges gas
- Base Number: 10884
- Callout Name: 10884
$55.09 $34.541
- ELEMENT ASSY. (OIL FILTER)
$16.82 $9.551 - $18.75 $13.731
- $40.73 $26.21
D4FZ-6A008-A
DOWEL (CYLINDER HEAD)Dowel - Pin- Require Quantity: 2
- Package Quantity: 4
- Base Number: 6A008
- Callout Name: 6A008
$7.42 $5.21
- VALVE (POSITIVE CRANKCASE VENTILATION)-P.C.V.
D9ZZ-6A666-A
Valve Assy- *EV-98-B , exc. Canadian leaded fuel vehicles "Before 11/5/84"
- Base Number: 6A666
- Callout Name: 6A666
D9OZ-6A666-A
Valve Assy- (P.C.V.) *EV-68-C
(P.C.V.) *EV-68-C , EXC. HIGH ALTITUDE
*EV-68-C , Canadian leaded fuel vehicles "Before 11/5/84" - Base Number: 6A666
- Callout Name: 6A666
- DOWEL (CYLINDER BLOCK)
D1FZ-6397-B
Sleeve - Guide- Align clutch pressure plate to flywheel
CLUTCH TO FLYWHEEL , M/T
TRANS. SPD:4 - Require Quantity: 3
- Package Quantity: 5
- Base Number: 6397
- Callout Name: 6397
$3.37 $2.365 
EAD-6397-B
Sleeve - Guide- To flywheel housing
to flywheel housing-1/2" x 1 - Require Quantity: 2
- Package Quantity: 4
- Base Number: 6397
- Callout Name: 6397
$2.90 $2.044
- PULLEY IDENTIFICATION CHART
$173.33 $118.561 
- RETAINER (CRANKCASE VENTILATION)-GROMMET
E7AZ-6A892-A
Grommet - Check Valve- (P.C.V. valve to rocker arm cover)
P.C.V. valve to cover - Base Number: 6A892
- Callout Name: 6A892
$14.95 $10.496 
$0.00
- PUMP ASSY. (WATER)
E6ZZ-8501-A
Pump Assy - Water- *PW-224 - incl. (1) * E4ZZ 8507-B gasket r/b E8ZZ-A , CID:121,(2000),140,(2300)
- Base Number: 8501
- Callout Name: 8501
$94.36 $57.091 
-371485-S
Plug - Engine- (PP-48-A)-plug (water pump)-hex. counter sunk head-3/4"-14 - r/b F2ZZ 6026-A , CID:302 STANDARD PART
- Callout Name: 8501
- Replaced By: F2ZZ-6026-A
$18.75 $13.731
- SENDER ASSY. (OIL PRESSURE ENGINE UNIT)
E4ZZ-9278-A
Sender Assy - Oil Pressure- (all)w/o tachometer , Oil pressure gauge
(all)w/tachometer , Oil pressure gauge
4 cyl. 134-diesel , Frame mounted Oil pressure gauge - Base Number: 9278
- Callout Name: 9278
$33.45 $20.981 
D4AZ-9278-A
Switch Assy - Oil Pressure- (all)w/o tachometer , Oil pressure light
4 cyl. 134-diesel , Frame mounted Oil pressure light - Base Number: 9278
- Callout Name: 9278
$27.50 $19.311
- PLUG (ENGINE)
-376099-S
Obsolescence - Policy- (PP-73-A)-plug (cylinder block rear)-cup-3/4" , STANDARD PART
(PP-73-A)-plug (rear hole in block) -cup type-3/4" , STANDARD PART - Callout Name: 6026
- Replaced By: -W720518-S437U
$2.13 $1.244 
D7AZ-6026-A
Plug - Engine- (Core holes in block and cyl. head)-Std. 1.50" O.D.
(Core holes in block or hd.)-1 1/2" O.D.
(Core holes in block or in head) - 1.50" O.D.
Block and cyl. hd.-standard-1 1/2" dia.
Std. 1.50" O.D. - Require Quantity: 4
- Package Quantity: 2
- Callout Name: 6026
- Replaced By: F6AZ-6026-BA
$5.73 $4.022
-87837-S
Plug - Engine- (P-15) (used to plug oil gallery in block) 1/4"-18 r/b F1ZZ 6026-B , STANDARD PART
r/b F1ZZ 6026-B (P-15)-plug (drain holes in block and oil gallery)- pipe-hex. countersunk-1/4"-18 , STANDARD PART
r/b F1ZZ 6026-B (P-15)-plug (oil gallery and drain holes)-pipe-1/4"-18 , STANDARD PART
r/b F1ZZ 6026-B (P-15)-plug (water drain holes and front oil gallery in block)-pipe-1/4"-18 x 27/64" , STANDARD PART
r/b F1ZZ 6026-B (P-15-)-plug (water jacket, air brake compressor oil hole in block, front and rear main oil gallery)- pipe-1/4"-18 , STANDARD PART - Callout Name: 6026
- Replaced By: F1ZZ-6026-B
$3.18 $2.232- -371485-S
Plug - Engine- (PP-48-A)-plug (clean out holes in block)- 3/4-16 pipe-also used in intake manifold , STANDARD PART
(PP-48-A)-plug (clean out holes in cyl. head)-pipe- 3/4"-14 , STANDARD PART
(PP-48-A)-plug (core holes in top of cyl. head)- pipe-3/4"-14 , STANDARD PART
r/b F2ZZ 6026-A (PP-48-A)-plug (clean out holes in hd.)-hex. countersunk hd.-3/4" , STANDARD PART - Require Quantity: 4
- Package Quantity: 1
- Callout Name: 6026
- Replaced By: F2ZZ-6026-A
$18.75 $13.731 
E6DZ-6026-C
Plug - Engine- (Clean out holes in block)-standard 1 5/8"
- Require Quantity: 5
- Package Quantity: 4
- Callout Name: 6026
- Replaced By: 2R3Z-6026-AA
$10.83 $7.614- E7GZ-6026-A
Plug - Expansion- Plug cup - 30mm O.D.
- Require Quantity: 4
- Package Quantity: 1
- Callout Name: 6026
$18.75 $13.731 - -376301-S
Plug - Expansion- (PP-67-A)-plug (air brake compressor oil return hole in block)-cup-1/2" , STANDARD PART
(PP-67-A)-plug (cyl. block oil passage)-cup-1/2" , STANDARD PART
(PP-67-A)-plug (front main oil gallery)-cup type-1/2" , STANDARD PART - Base Number: 376301-S
- Callout Name: 6026
$0.00 
-E450102-S80
Plug- (AP-10-G) Plug (drain holes in block) 1/8"-27 , STANDARD PART
- Require Quantity: 8
- Package Quantity: 1
- Base Number: E450102-S80
- Callout Name: 6026
- C5AZ-6026-J
Plug - Engine- (Holes in cyl. head and block)-standard 2.078" O.D.
(Holes in rear of block)-Standard 2.078" O.D.-cup - Base Number: 6026
- Callout Name: 6026
C8SZ-6026-A
Plug - Engine- (OIL GALLERY IN BLOCK)-5/16"-18
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 6026
- Callout Name: 6026
- C9AZ-6026-A
Plug - Engine- (Distributor oil access hole in block)-standard .259" O.D.
- Base Number: 6026
- Callout Name: 6026
- FLYWHEEL ASSY.
-379299-S2
Nut - Hex.- (MM-169-J)-Nut (flywheel to converter) 3/8-24" , STANDARD PART A/T
(MM-169-J)-nut (flywheel to converter)-3/8"-24 , STANDARD PART AOT - Require Quantity: 4
- Package Quantity: 4
- Base Number: 379299-S2
- Callout Name: 6375
- Replaced By: -378941-S441
$3.25 $1.914 
E5TZ-6375-J
Flywheel Assy- #E3TR-AA - Incl. D7TZ 6384-A ring gear , M/T w/11" dutch
- Callout Name: 6375
- SCREEN, TUBE AND COVER ASSY. (OIL PUMP)
$46.71 $33.621 
-382802-S2
Nut - Hex.- (MM-173-JB)-nut (screen and tube to main brg cap) 3/8"-16-locking-Not replaced , STANDARD PART
- Base Number: 382802-S2
- Callout Name: 6622
-34807-S8
Lockwasher- (X-66)-Washer-lock-3/8" , STANDARD PART
(X-66)-washer-3/8" , STANDARD PART - Base Number: 34807-S8
- Callout Name: 6622
- SPROCKET (CRANKSHAFT)
-375055-GS
Key - Crankshaft And Camshaft- Key (pulley to crankshaft)-woodruff
- Base Number: 375055-GS
- Callout Name: 6306
$4.33 $2.543
$10.00 $5.854
$10.67 $7.498
- GASKET SET (OIL PAN)
$21.37 $15.381 
$24.97 $18.281
C9AZ-6890-A
INSERT (OIL FILTER MOUNTING BOLT)Insert- Used in oil filter to block mounting
- Base Number: 6890
- Callout Name: 6890
$0.00
E3TZ-6397-C
DOWEL (CYLINDER BLOCK TO FLYWHEEL HSG.)Sleeve - Guide- Require Quantity: 2
- Package Quantity: 4
- Base Number: 6397
- Callout Name: 6397
- Replaced By: 6L2Z-6397-AA
- COVER ASSY. (CYLINDER FRONT)
-388551-S2
Stud 5/16-18-18X3.34 Hex Shield- (WW-135-C)-Stud (cover to blk.)-5/16"-18-18 x 3 5/16" , STANDARD PART
- Base Number: 388551-S2
- Callout Name: 6019
$18.75 $13.731 
$389.44 $280.341- -388552-S8
Stud 5/16-18-18X3.09- (WW-135-AN)-Stud (cover to blk.) 5/16"-18-18 x 3 1/32" , STANDARD PART
- Base Number: 388552-S8
- Callout Name: 6019
E3ZZ-6019-B
Cover Assy - Cylinder Block Front- "Before 8/2/82" , inner
"From 8/2/82" , inner - Base Number: 6019
- Callout Name: 6019
- "Before 8/2/82" , inner
- -N602549-S51M
SCREEN, TUBE & COVER ASSY. (OIL PUMP)Bolt And Washer Assembly- (AB-345) Bolt & washer (tube to block) M8-20mm hex. hd. , STANDARD PART
- Callout Name: 6622
- Replaced By: -N602549-S2
$13.00 $7.611
- $2.60 $1.525
-N602550-S2
PUMP ASSY. (FUEL) Also refer to groups 9H307 & 9C407Bolt- (AB-62) screw & washer (att. pump to block)-M8 x 25mm , STANDARD PART
- Require Quantity: 2
- Package Quantity: 5
- Base Number: HB1
- Callout Name: 9350
$2.60 $1.525
- $2.60 $1.525
- "O" RING (SEAL)
$6.86 $4.314 - $18.75 $13.731
C3AZ-12270-A
CLAMP (DISTRIBUTOR CYLINDER HEAD)Clamp- *DZ-410 , CID:171,300
*DZ-410 , CID:302,351,400,460 - Base Number: 12270
- Callout Name: 12270
$58.55 $36.711
- GEAR (CAMSHAFT)
E1TZ-6256-A
Sprocket - Camshaft- "From 5/1/81/" , Steel tooth gear-not interchangeable with phenolic tooth cam gear
- Callout Name: 6256
$57.58 $42.141 - D3TZ-6256-C
Sprocket - Camshaft- Kit - consists of phenolic tooth cam gear and crankshaft gear , refer to TSB 82-21-19
- Base Number: 6256
- Callout Name: 6256
- D4FZ-6638-A
BOLT AND WASHER (OIL PUMP ATTACHING)Screw And Washer Assembly- Require Quantity: 2
- Package Quantity: 5
- Callout Name: 6638
- Replaced By: -N602550-S2
$2.60 $1.525
E3TZ-7007-A
PLATE ASSY. (ENGINE REAR)Plate - Cylinder Block Rear- TRANS. SPD:All 2.0L,2.3L engs.
TRANS:C3
TRANS:C5 - Callout Name: 7007
$121.92 $89.231
E5TZ-7550-D
DISC ASSY. (CLUTCH)-Sold only as a remanufactured itemDisc Assy - Clutch- DIA:8 55/64" , TYPE: G CID: 2.0L,2.3L,2.8L
- Callout Name: 7550
$79.95 $58.511
E6HZ-6020-C
GASKET (CYLINDER FRONT COVER)Gasket- r/b F1HZ 6020-C
- Callout Name: 6020
- Replaced By: F1HZ-6020-C
$17.82 $11.472
- PUMP ASSY. (OIL)-34807-S8
Lockwasher- (X-66)-LOCKWASHER-3/8" , STANDARD PART
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 34807-S8
- Callout Name: 6600
C2OZ-6600-A
Pump Assy - Oil- rotor type-hex. drive-incl. (1) ea. C2OZ 6626-C and C2OZ 6659-C gskts.
- Base Number: 6600
- Callout Name: 6600
- -377850-S
PULLEY ASSY. (CRANKSHAFT)Bolt- (BB-273-A)-bolt (6312 to crankshaft)-5/8"-18 x 2" , STANDARD PART
- Base Number: 377850-S
- Callout Name: 6312
- -378941-S7-8
FLYWHEEL ASSY.-also refer to basic 6477No Description Available- (MM-169-H)-Nut (flywheel to converter)-3/8"-24 r/b 378941-S7 , STANDARD PART C6 A/T
(MM-169-H)-Nut (flywheel to converter)-3/8"-24 r/b 378941-S7 , exc. A4LD
(MM-169-H)-nut (flywheel to converter)-3/8"-24 , STANDARD PART C6
(MM-169-H)-nut (flywheel to converter)-3/8"-24 , STANDARD PART C6 A/T
NUT (FLYWHEEL TO CONVERTOR) (MM-169-H)-3/8"-24 , STANDARD PART A/T - Require Quantity: 4
- Package Quantity: 1
- Callout Name: 6375
- -43002-S
SPROCKET (CAMSHAFT)Bolt 3/8-16 X 1.50- (B-257)-Bolt(sprocket to cam)-3/8"-16 x 1 1/2" , STANDARD PART
- Callout Name: 6256
-N602529-S2
COVER (INTAKE MANIFOLD)Screw- (AB-53-A) screw & washer (att. cover to manifold) M6 x 20 , STANDARD PART
- Require Quantity: 4
- Package Quantity: 1
- Base Number: N602529-S2
- Callout Name: 9E434
B9AE-6A008-A
DOWEL (CYLINDER HEAD TO CYLINDER BLOCK)Dowel- Require Quantity: 4
- Package Quantity: 4
- Base Number: 6A008
- Callout Name: 6A008
C2OZ-6278-A
WASHER (CAMSHAFT SPROCKET)Washer- 13/32" I.D. x 1 3/16" O.D. x 7/32" thick r/b F3SZ-A
r/b F3SZ 6278-A 13/32" I.D. x 1 3/16" O.D. x 7/32" thick - Callout Name: 6278
- Replaced By: F3SZ-6278-A
- C2OZ-6A008-A
DOWEL (CYLINDER HEAD TO CYLINDERDowel- 7/16" height x 9/16" I.D. x 43/64" O.D.-split
DOWEL (CYLINDER HEAD TO CYLINDER BLOCK)-35/64" I.D. x 43/64" O.D.-7/16" long-split - Base Number: 6A008
- Callout Name: 6A008
- SHAFT ASSY. (OIL PUMP INTERMEDIATE)
- D4FZ-6613-A
PLATE (AUXILIARY SHAFT RETAINER)Plate - Retaining- Require Quantity: 2
- Package Quantity: 1
- Callout Name: 6613
D4FZ-6A753-A
BEARING (AUXILIARY DRIVE SHAFT FRONT)Bearing Aux Drive Shft- Std.-1.658" I.D.
- Base Number: 6A753
- Callout Name: 6A753
- GASKET (OIL PUMP INLET TUBE)
$0.00
E8ZZ-8507-A
GASKET (WATER PUMP HOUSING AND CYLINDER)Gasket - Water Pump- CID:121,(2000),140,(2300) "Before 10/4/82"
- Callout Name: 8507
Genuine Ford Parts, the Right Choice
FordPartsGiant.com offers the wholesale prices for genuine 1983 Ford Ranger parts. Parts like Gas Engine Parts - Internal-Upper are shipped directly from authorized Ford dealers and backed by the manufacturer's warranty. Parts fit for the following vehicle options. Engine: 4 Cyl 2.3L. Transmission: 4MT.