×
- Live Chat
- 1-888-788-9341
My Garage
My Account
Cart
Cylinder Block - External (Windsor) fit your 1986 Ford Bronco 8 Cyl 5.8L 4-Speed Manual Transmission
Currently shopping for
1986 Ford Bronco
Change VehicleVehicle Options
8 Cyl 5.8L; 4-Speed Manual TransmissionVehicle Options
8 Cyl 5.8L; 4-Speed Manual TransmissionCategories Close X
Currently selected
Engine
- Camshaft Gear And Bearings
- Crankcase Ventilation System
- Crankcase Ventilation System Crankshaft And Flywheel
- Cylinder Block - External (Modified)
- Cylinder Block - External (Windsor)
- Cylinder Block - Head - Typical
- Cylinder Block - Internal (Modified)
- Cylinder Block - Internal (Windsor)
- Cylinder Block Cylinder Head, Valves And Related Parts
- Emission Reduction System - Engine Block Immersion Heater
- Emission Reduction System - Modified
- Emission Reduction System - Windsor
- Emission Reduction System Engine Assy.
- Engine Supports
- Engine Supports - (Front And Rear)
- Engine Supports - (Front)
- Engine Supports - (Rear)
- Oil Filler Pipe Installation
- Oil Filler Pipe Installation - Piston And Connecting Rod
- Oil Filler Pipe Installation Oil Filter (Spin-On Type)
- Oil Filler Pipe Installation Oil Pump
- Oil Filler Pipe Installation Valves, Push Rods And Rocker Arm Cover
Other Categories
Accelerator Linkage, Air Cleaner & Speed Control
Air Conditioner, Radio & Shock Absorbers
Alternator, Battery, Distributor & Starter
BODY Body
Fenders & Hood
Frame, Exhaust System & Springs
Front Axle & Steering
Fuel System & Manifolds
Lamps & Wiring
Manual Transmission
Radiator & Grill
Rear Axle, Drive & Coupling Shafts
Speedometer, Bumpers, Mirrors & Wipers
Wheels & Brakes
Parts Questions
Sort by:
Recommended
Part No. & Part Description
Price & Qty.
Part No. &
Part Description
Part Description
- DISTRIBUTOR ASSY. IDENTIFICATION CHART
$24.36 $15.281 
$40.73 $25.541
$28.00 $17.561
$46.18 $28.961
$34.18 $21.431
$36.73 $23.031
$11.58 $7.451
$72.96 $53.401- $18.75 $13.731
$25.64 $13.731- $18.75 $13.731
$0.00
- $0.00
- CAP ASSY. - (DISTRIBUTOR) - also refer to group 12127E6TZ-12106-A
Housing Assy - Distributor Terminal- *DH-411-B , CID:All
- Base Number: 12106
- Callout Name: 12106
$24.36 $15.281 
E6AZ-12106-A
Housing Assy - Distributor Terminal- *DH-434 , CID:300
*DH-434 , CID:300 U/8500 lb. GVW - Base Number: 12106
- Callout Name: 12106
$28.00 $17.561
-ASF-32C
SPARK PLUG ASSY.Spark Plug- CID:302,351-4/B
- Require Quantity: 8
- Package Quantity: 1
- Callout Name: 12405
$18.75 $13.731
E5TZ-18599-C
ELBOW (HOT WATER HEATER and AIR CONDITIONER CONNECTION)Elbow- 3/4-14 male conn. x 3/8-18 female conn. x 3/4" heater hose conn. , w/4.9L- located on thermostat housing
- Callout Name: 18599
- FLYWHEEL ASSY.
-379299-S2
Nut - Hex.- (MM-169-J)-nut (flywheel to converter)-3/8"-24 , STANDARD PART AOT
- Require Quantity: 4
- Package Quantity: 4
- Base Number: 379299-S2
- Callout Name: 6375
- Replaced By: -378941-S441
$3.25 $1.914 
D5TZ-6375-A
Flywheel Assy- 164 tooth ring gear - (4) attaching holes on 11 13/32" bolt circle , C6
- Base Number: 6375
- Callout Name: 6375
$83.33 $57.001
E5TZ-6375-J
Flywheel Assy- #E3TR-AA - Incl. D7TZ 6384-A ring gear , M/T w/11" dutch
- Callout Name: 6375
E6DZ-6700-A
SEAL (CYLINDER FRONT COVER OIL)Seal Assy - Crankshaft Oil - Front- "From 3/12/85" , r/b F4SZ 6700-A
"From 5/15/85" , Front entry type seal - Base Number: 6700
- Callout Name: 6700
$33.00 $23.171
$60.73 $38.745
D9AZ-6731-A
ELEMENT ASSY. (OIL FILTER)Filter Assy - Oil- *FL-1-A-spin-on
- Base Number: 6731
- Callout Name: 6731
$16.82 $8.781
D9OZ-6A666-A
VALVE (POSITIVE CRANKCASE VENTILATION)-P.C.V.Valve Assy- (P.C.V.) *EV-68-C
(P.C.V.) *EV-68-C , EXC. HIGH ALTITUDE
*EV-68-C , EFI "From 11/5/84" - Base Number: 6A666
- Callout Name: 6A666
- BOLT (CYLINDER HEAD)
C2OZ-6065-B
Bolt - Cylinder Head- 7/16"-14 x 3 15/16"
7/16"-14 x 3 29/32" - Require Quantity: 14
- Package Quantity: 10
- Callout Name: 6065
- Replaced By: F3ZZ-6065-B
$6.93 $4.8710 - 7/16"-14 x 3 15/16"
C8SZ-6065-B
Bolt - Hex.Head- 9/16"-12 x 4 3/8"
- Require Quantity: 10
- Package Quantity: 4
- Base Number: 6065
- Callout Name: 6065
$30.29 $21.274- C8SZ-6065-A
Bolt - Hex.Head- "Before 2/2/87" , 9/16"-12 x 5 1/8" r/b E7TZ-B
- Require Quantity: 10
- Package Quantity: 4
- Callout Name: 6065
- Replaced By: E7TZ-6065-B
$22.58 $15.854 
C9OZ-6065-B
Bolt - Hex.Head- Long bolts-1/2'-13x4'
- Require Quantity: 10
- Package Quantity: 1
- Callout Name: 6065
- RETAINER (CRANKCASE VENTILATION)-GROMMET
E7AZ-6A892-A
Grommet - Check Valve- (P.C.V. valve to rocker arm cover)
P.C.V. valve to cover - Base Number: 6A892
- Callout Name: 6A892
$14.95 $10.496 
$0.00
- PLUG (CAMSHAFT REAR BEARING)
$69.09 $48.082 
C2OZ-6266-B
Cover- Standard-2.51" thick
Std.-2.156" O.D.-Cup shaped - Base Number: 6266
- Callout Name: 6266
EAD-6397-B
DOWEL (CYLINDER BLOCK)Sleeve - Guide- To flywheel housing
to flywheel housing-1/2" x 1 - Require Quantity: 2
- Package Quantity: 4
- Base Number: 6397
- Callout Name: 6397
$2.90 $2.044
- PLUG (ENGINE)
-376099-S
Obsolescence - Policy- (PP-73-A)-plug (cylinder block rear)-cup-3/4" , STANDARD PART
(PP-73-A)-plug (rear hole in block) -cup type-3/4" , STANDARD PART - Callout Name: 6026
- Replaced By: -W720518-S437U
$2.13 $1.244 
D7AZ-6026-A
Plug - Engine- (Core holes in block or hd.)-1 1/2" O.D.
(Core holes in block or in head) - 1.50" O.D.
Std. 1.50" O.D. - Require Quantity: 6
- Package Quantity: 2
- Callout Name: 6026
- Replaced By: F6AZ-6026-BA
$5.73 $4.022
-87837-S
Plug - Engine- r/b F1ZZ 6026-B (P-15)-plug (drain holes in block and oil gallery)- pipe-hex. countersunk-1/4"-18 , STANDARD PART
r/b F1ZZ 6026-B (P-15)-plug (oil gallery and drain holes)-pipe-1/4"-18 , STANDARD PART
r/b F1ZZ 6026-B (P-15)-plug (water drain holes and front oil gallery in block)-pipe-1/4"-18 x 27/64" , STANDARD PART
r/b F1ZZ 6026-B (P-15-)-plug (water jacket, air brake compressor oil hole in block, front and rear main oil gallery)- pipe-1/4"-18 , STANDARD PART - Callout Name: 6026
- Replaced By: F1ZZ-6026-B
$3.18 $2.232- -371485-S
Plug - Engine- (PP-48-A)-plug (clean out holes in block)- 3/4-16 pipe-also used in intake manifold , STANDARD PART
(PP-48-A)-plug (clean out holes in cyl. head)-pipe- 3/4"-14 , STANDARD PART
(PP-48-A)-plug (core holes in top of cyl. head)- pipe-3/4"-14 , STANDARD PART
r/b F2ZZ 6026-A (PP-48-A)-plug (clean out holes in hd.)-hex. countersunk hd.-3/4" , STANDARD PART - Require Quantity: 4
- Package Quantity: 1
- Callout Name: 6026
- Replaced By: F2ZZ-6026-A
$18.75 $13.731 
E6DZ-6026-C
Plug - Engine- (Clean out holes in block)-standard 1 5/8"
- Require Quantity: 5
- Package Quantity: 4
- Callout Name: 6026
- Replaced By: 2R3Z-6026-AA
$10.83 $7.614
-352532-S
Plug - Blanking- (PP-60)-plug (oil level indicator hole in block)- cup-3/8" , STANDARD PART 4/W/D
- Callout Name: 6026
- Replaced By: -352532-S2
- -376301-S
Plug - Expansion- (PP-67-A)-plug (air brake compressor oil return hole in block)-cup-1/2" , STANDARD PART
(PP-67-A)-plug (cyl. block oil passage)-cup-1/2" , STANDARD PART
(PP-67-A)-plug (front main oil gallery)-cup type-1/2" , STANDARD PART - Base Number: 376301-S
- Callout Name: 6026
$0.00 - C5AZ-6026-J
Plug - Engine- (Holes in cyl. head and block)-standard 2.078" O.D.
- Base Number: 6026
- Callout Name: 6026
C8SZ-6026-A
Plug - Engine- (OIL GALLERY IN BLOCK)-5/16"-18
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 6026
- Callout Name: 6026
- C9AZ-6026-A
Plug - Engine- (Distributor oil access hole in block)-standard .259" O.D.
- Base Number: 6026
- Callout Name: 6026
- MANIFOLD (EXHAUST)
-390530-S2
Bolt-3/8-16 X 1.25 Hex Flange- (BB-416-BF)-bolt (att. manifold)-10 3/8" -16 x 1.25 hex head , STANDARD PART
- Require Quantity: 10
- Package Quantity: 2
- Base Number: 390530-S2
- Callout Name: 9430
$9.66 $5.652 
-390589-S8
Stud-5/16-18-18X2.625 Hex Shield- (WW-161-C) stud (alt. 9424) 5/16-18-18 x 2.65" hex shoulder , STANDARD PART
- Require Quantity: 4
- Package Quantity: 1
- Base Number: 390589-S8
- Callout Name: 9430
$18.75 $13.731
- -389199-S36
Stud 5/16-18-18X2.98 Shield- (WW-161-O) stud (alt. 9424) 5/16-18-18 x 2.98" hex shoulder , STANDARD PART
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 389199-S36
- Callout Name: 9430
- -390358-S8
Bolt 5/16-18X1.75 He- (BB-551-DM) bolt (alt. 9424) 5/16-18 x 1 3/4" hex flange , STANDARD PART
- Require Quantity: 4
- Package Quantity: 1
- Base Number: 390358-S8
- Callout Name: 9430
-390528-S100
Stud- (WW-122-C)-stud (att. manifold)- 3/8" - 16 x 2.42 hex shoulder , STANDARD PART
- Require Quantity: 3
- Package Quantity: 1
- Base Number: 390528-S2
- Callout Name: 9430
- -390653-S8
Bolt - Flanged Hex.- (BB-551-DY) bolt (alt. 9424) 5/16-18 x 6.07" hex flange to cyl head , STANDARD PART
- Require Quantity: 2
- Package Quantity: 1
- Callout Name: 9430
- E5TZ-9430-D
Manifold Assy - Exhaust- R.H. -does not have thermactor air holes , U/8500# GVW "From 12/84"
- Location: Passenger Side
- Callout Name: 9430
- E6AZ-9430-G
Manifold Assy - Exhaust- R.H. (retain for 1986 only) -with EGR hole. Plug D9ZZ-9G458-A
- Location: Passenger Side
- Callout Name: 9430
- THERMOSTAT (WATER)
$11.36 $7.311 
$11.36 $7.311
E4AZ-6C624-A
SENSOR ASSY. (LOW OIL LEVEL)Sensor Assy- r/b F2AZ 6C624-B
- Callout Name: 6C624
- Replaced By: F2AZ-6C624-B
$560.00 $279.511
- GASKET SET (OIL PAN)
$21.37 $15.381 
$24.97 $18.281
C9AZ-6890-A
INSERT (OIL FILTER MOUNTING BOLT)Insert- Used in oil filter to block mounting
- Base Number: 6890
- Callout Name: 6890
$0.00
- GASKET (INTAKE MANIFOLD TO CYLINDER HEAD) ALSO REFER TO GROUP 9433
$0.00
- PUMP ASSY. (WATER)-371485-S
Plug - Engine- (PP-48-A)-plug (water pump)-hex. counter sunk head-3/4"-14 - r/b F2ZZ 6026-A , CID:302 STANDARD PART
- Callout Name: 8501
- Replaced By: F2ZZ-6026-A
$18.75 $13.731 
-387850-S100
Bolt 5/16-18 X 1.68 Hex Head- (BB-429-JA)-bolt (water pump to front cover) hex. head-5/16"-18 x 1 11/16" , CID:302 STANDARD PART
- Require Quantity: 5
- Package Quantity: 1
- Base Number: 387850-S100
- Callout Name: 8501
-E800156-S72
Screw- Bolt (water pump to eng. front) , CID:7.5L STANDARD PART
- Base Number: E800156-S72
- Callout Name: 8501
D6ZZ-8501-B
Pump Assy - Water- *PW-153 - incl. (1) E2ZZ 8507-A gasket , CID:302
*PW-153 - incl. (1) E2ZZ 8507-A gasket , CID:351W - Base Number: 8501
- Callout Name: 8501
- COVER ASSY. (CYLINDER FRONT)
-388551-S2
Stud 5/16-18-18X3.34 Hex Shield- (WW-135-C)-Stud (cover to blk.)-5/16"-18-18 x 3 5/16" , STANDARD PART
- Base Number: 388551-S2
- Callout Name: 6019
$18.75 $13.731 - -388552-S8
Stud 5/16-18-18X3.09- (WW-135-AN)-Stud (cover to blk.) 5/16"-18-18 x 3 1/32" , STANDARD PART
- Base Number: 388552-S8
- Callout Name: 6019
C3AZ-12270-A
CLAMP (DISTRIBUTOR CYLINDER HEAD)Clamp- *DZ-410 , CID:171,300
*DZ-410 , CID:302,351,400,460 - Base Number: 12270
- Callout Name: 12270
$58.55 $36.711
E3AZ-6023-A
POINTER (TIMING)Pointer Assembly - Ignition Timing- #E1TE 6M025-AB, E3TE 6M025-AA, r/b F1TZ 6023-A
r/b F1TZ 6023-A #E1TE 6M025-AB, E3TE 6M025-AA - Callout Name: 6023
- Replaced By: F1TZ-6023-A
$53.50 $37.241
- GASKET (VALVE ROCKER ARM COVER)
$106.50 $58.461 - E5ZZ-6584-B
Gasket - Valve Rocker- "Before 4/15/87"
- Require Quantity: 2
- Package Quantity: 1
- Callout Name: 6584
- Replaced By: F1ZZ-6584-B
$41.49 $30.371 - E3TZ-6584-E
Gasket - Valve Rocker Arm Cover- "FROM 11/3/82"
- Require Quantity: 2
- Package Quantity: 1
- Callout Name: 6584
- GASKET (CARBURETOR) - ALSO REFER TO GROUP 9A589
E5HZ-9C477-B
Gasket- CARB TO SPACER - #D9TE 9C477-BC,BB, #E5HE 9C477-BA , with 4/B carb.
- Base Number: 9C477
- Callout Name: 9447
$6.18 $3.981 
- E5ZZ-9C477-A
Gasket- CARB TO MANIFOLD - Used between shield & spacer , with 4/B carb.
- Callout Name: 9447
E6HZ-6020-C
GASKET (CYLINDER FRONT COVER)Gasket- r/b F1HZ 6020-C
- Callout Name: 6020
- Replaced By: F1HZ-6020-C
$17.82 $11.472
- PAN ASSY. (OIL)
$164.52 $118.431
$77.27 $38.891
-351418-S
HEAD (CYLINDER)Insert- (UU-136)-Insert (plugs for thermactor holes in head) - 5/8" - 11 x 7/16" - 14 x 1 1/8" , STANDARD PART
(UU-136)-insert(used in front and rear of cyl. head)-5/8"-11 O.D. thread x 7/16"-14 I.D. thread , STANDARD PART - Require Quantity: 4
- Package Quantity: 1
- Callout Name: 6049
- -378941-S7-8
FLYWHEEL ASSY.-also refer to basic 6477No Description Available- (MM-169-H)-Nut (flywheel to converter)-3/8"-24 r/b 378941-S7 , STANDARD PART C6 A/T
(MM-169-H)-Nut (flywheel to converter)-3/8"-24 r/b 378941-S7 , exc. A4LD
(MM-169-H)-nut (flywheel to converter)-3/8"-24 , STANDARD PART C6
(MM-169-H)-nut (flywheel to converter)-3/8"-24 , STANDARD PART C6 A/T
NUT (FLYWHEEL TO CONVERTOR) (MM-169-H)-3/8"-24 , STANDARD PART A/T - Require Quantity: 4
- Package Quantity: 1
- Callout Name: 6375
- COVER ASSY. (VALVE ROCKER ARM)
-387883-S2
Stud & Washer Assembly- r/b 387883-S8M (WW-160-E)-stud & washer (cover to cyl. head)-1/4"-20 x 1/4"-20 x 1.82" , STANDARD PART
- Require Quantity: 6
- Package Quantity: 1
- Callout Name: 6582
- MANIFOLD (INTAKE)
- -389199-S36
Stud 5/16-18-18X2.98 Shield- (WW-161-O) stud (attach 9424) 5/16-18-18 x 2.98" hex shoulder , STANDARD PART
- Require Quantity: 4
- Package Quantity: 1
- Base Number: 389199-S36
- Callout Name: 9424
- -390249-S2
Screw 5/16 18X1 21 Pan Hd- (BB-637-LBO) screw (att. upper to lower 9424) 5/16-18 x 1 7/32 torx head , STANDARD PART
- Callout Name: 9424
- -390948-S36
Stud-5/16-18/1/4-20X- STANDARD PART , Stud 5/16-18/1/4-20x5.31 hex shoulder (att. 9424 to cyl head, att. coil/brkt
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 390948-S36
- Callout Name: 9424
$0.00
C8AZ-6767-B
ELBOW (CRANKCASE VENTILATION HOSE)Plug- Also refer to group 9600 for air cleaner application , without A/C
Fits in filler cap-use to attach hose from air cleaner
Hose to oil filler cap
hose to cap-90DEG.-5/8"
hose to cap-90DEG.-5/8' - Base Number: 6767
- Callout Name: 6767
D2TZ-7007-A
PLATE ASSY. (ENGINE REAR)Plate - Cylinder Block Rear- TRANS:AOT #D2TE 6A373-AA,E7AE-AA, E8TE 6A372-AA
TRANS:C4 #D2TE 6A373-AA,E7AE-AA, E8TE 6A372-AA
TRANS:C6 #D2TE 6A373-AA,E7AE-AA, E8TE 6A372-AA - Callout Name: 7007
$0.00
E1TZ-12A406-A
SHIELD ASSY. (SPARK PLUG HEAT)Shield- CID:255,302 , R.H. and L.H.
- Location: Passenger Side And Driver Side
- Require Quantity: 2
- Package Quantity: 1
- Base Number: 12A406
- Callout Name: 12A406
$0.00
$0.00
E3AZ-6766-A
CAP ASSY. (OIL FILLER AND BREATHER)Cap Assy - Oil Filler- *EC-682 - Use on valve cover , w/o filler pipe
- Base Number: 6766
- Callout Name: 6766
- SPACER (CARBURETOR TO INTAKE MANIFOLD) - Also refer to group 9447 and 9C477
E4TZ-7505-C
HOUSING (CLUTCH) - If not listed P1A 7005 CaseHousing - Clutch- #E4TA 7500-EA, E4TA 7505-DA , TRANS. SPD:4 TRANS. TYPE:All 4.9 5.0, 5.8WL
- Base Number: 7505
- Callout Name: 7505
E5AZ-6051-A
GASKET (CYLINDER HEAD)Gasket - Cylinder Head- r/b F1ZZ 6051-A
- Require Quantity: 2
- Package Quantity: 1
- Callout Name: 6051
E6TZ-6750-B
INDICATOR (OIL LEVEL)Indicator Assy - Oil Level- "Before 12/15/86" , #E5TE-BA
- Callout Name: 6750
Genuine Ford Parts, the Right Choice
FordPartsGiant.com offers the wholesale prices for genuine 1986 Ford Bronco parts. Parts like Cylinder Block - External (Windsor) are shipped directly from authorized Ford dealers and backed by the manufacturer's warranty. Parts fit for the following vehicle options. Engine: 8 Cyl 5.8L. Transmission: 4MT.